Whether you have a front or top loading washer, there are several causes that can cause the washer to stop draining water. If your washer has a hose and drain pipe, check these to see if there are any clogs. If there are, you can clean them to clear the water sludge.
What causes washing machine not to drain and spin?
Whether you own a top-loading or front-loading washer, one of the most common questions you may have is what causes your washing machine to not drain and spin. If your machine will not drain, you may find that your clothes are wet and a mess. If you are having trouble with your washing machine, it is best to call a professional to repair your machine.
The most common problem that causes your washer to not drain and spin is a broken lid switch. This is a simple part that can be easily replaced. However, if your machine has a defective lid switch assembly, you may need to replace it.
Another common problem is a clogged drain hose. The drain hose is usually heavy duty, but can be kinked, which can interfere with the flow of water.
Sometimes, a clogged drain hose will prevent a washing machine from draining. You can try to clear the clog by using a drain snake.
If you have a top-loading washing machine, you may want to drain the excess water from the tub before draining the clothes. You should also be aware that a top-loading washing machine may only drain if the lid is closed.
4 Reasons Your Washing Machine Won’t Drain or Spin
Having your washing machine not drain or spin can leave you with a lot of dirty clothes. While the most common reason for this is a clogged drain, there are a number of other problems that can also lead to this type of issue. Regardless of the cause, a thorough approach can help you find the right solution for your washing machine.
The most common reason for a washer not draining or spinning is a clogged drain hose. A kinked hose will prevent proper water flow and can even obstruct the drain pump.
Another common cause is a broken water level control. If this is the case, the machine may need to be restarted. The problem may also be caused by a damaged door lock or lid switch. The lid switch is a small plastic piece that is located under the lid.
You can also check the drain pump to see if it is clogged. Often, this is caused by a small item that got stuck inside of the pump. Luckily, this is a relatively easy fix.
Troubleshoot top-load washer won’t drain or spin
Whether you are using a top load or a front load washer, there are a few common problems that can cause your machine to not drain or spin. Using a few troubleshooting tips can help you fix your problem, and keep your laundry clean.
First, check the drain hose. If it is kinked, it will prevent your washer from draining. To unclog the hose, remove it from the washtub and bend it to straighten out the kink.
If your drain hose is not clogged, check the water level valve. The valve may be clogged, or you may have a clog in the plastic tube that connects it to the water level control.
Next, check the lid switch. A lid switch is a small plastic piece located under the lid. It is meant to prevent damage from falling. If it is malfunctioning, it will not spin your washer when the lid is closed. If you are unsure, you can test the switch by using a multimeter or pulling the switch down.
If your top load washer is draining but not spinning, there may be a problem with the drain pump. If you suspect this, you may need to replace the pump.
Check for clogs in the drain hose and drain pipe
Often, clogs in the drain hose and drain pipe of your washing machine can be easily fixed. A clog can cause the water to flow improperly, or it may not drain at all. To avoid these problems, it is best to have a reputable plumber inspect the pipes.
A clog can be caused by several different things, such as grease, soap, egg shells, and other items. You may need to snake your drain hose to get rid of a clog.
If the clog can’t be reached with a snake, you can try to boil water and flush it down the drain. You will need to use protective gloves and ventilation. Don’t use this method if you can’t safely handle the chemicals.
Another method is to use a plumber’s snake. These can be purchased at any hardware store. They can be effective at removing clogs that are deeper than the standard snake. A plumber can also assess the condition of your drain pipes, and recommend the best course of action for removing the clog.
Check the top-load washer drain pump
Depending on the brand and model of your top-load washer, it may be a good idea to check the drain pump to see if it’s working properly. If the pump isn’t making a noise or doesn’t appear to be making any sense, then you may want to have it replaced.
To check the drain pump, you’ll need to disengage the power cord, remove the top panel, and pull the washer away from the wall. It’s best to get a professional to do this for you.
You may also want to check your belt. If the belt has a worn or damaged area, it can cause the washer to stop draining. A replacement belt is relatively easy to find at a local appliance store.
If you’re unsure of what the pump is, you can find a manual illustration or call a professional to help.
Another thing you should check is the lid switch. This is a safety feature on many top-load washing machines. The lid switch is in series with the motor circuit. It closes the lid, but it also projects outwards to prevent damage if the lid falls open.
How do you clean a top load washing machine filter?
Whether you have a top load or front load machine, cleaning the filter can help improve your washer’s performance and longevity. Lint is a common thing in the filter of a washing machine and it can be easily cleaned using a damp cloth. Leaving it dirty can also lead to clogging, which is not good.
The filter of a washing machine is located in several places. Some of them are fixed, while others are removable. Your manufacturer’s instructions will vary on how often to clean these filters.
In general, filters should be cleaned once a month to twice a year. Some manufacturers recommend cleaning the filter once a month while others recommend cleaning it once a month. A dirty filter can lead to a clogged drain pump, which can lead to dripping clothes.
The drain pump filter is typically located behind a small panel on the bottom right of the machine. To access it, you’ll need a flathead screwdriver. You’ll also want to take a towel and place it down before opening the door.
Check the washing machine timer
Having a washing machine that does not drain water can be a frustrating problem. A few simple fixes can resolve this problem. There are several causes for this. A common problem is a malfunctioning timer. The timer is the brain of a washer, and it controls the timing of various functions during the washing cycle. If it is malfunctioning, the washer will not drain water.
A washing machine timer has small parts that are not visible. These components control various washer functions, including the spin cycle and the water level.
Some of these components are mechanical, while others are electronic. A malfunctioning timer may cause the washer to stall at the end of a wash cycle. A faulty lid switch will also prevent the washer from draining water. You can find the lid switch by removing the top panel of the machine. It is a small plastic piece that is located under the lid. It supplies power to the timer circuit. It is best to have a professional repairperson inspect this component for you.
Test the washing machine lid switch
Whether you have a top load or front load washing machine, the lid switch is very important. When it is not working properly, it can prevent the washer from draining water. Fortunately, it is easy to replace the lid switch.
Before beginning the replacement, you should ensure that the lid switch is compatible with the make and model of the washing machine. Many replacement parts are available online and in local appliance parts stores. You should also make sure that you are using the right screws to hold the new switch in place.
You should also test the lid switch with a multimeter. You can do this by tapping the switch terminals with the probes. You may also want to try cleaning the lid switch with a little vinegar and cotton wipes.
In order to test the lid switch, you should first unplug the machine. Then, you should turn off the water lines. If you are not sure about the lid switch, you can try manually closing the lid. If you hear a clicking sound when closing the lid, the lid switch may be malfunctioning.
Here are some of the popular cities where we service appliances in Brooklyn Borough or Kings County Service Area in New York:
Brooklyn, Williamsburg, Sunset Park, Central Brooklyn, Greenpoint, Southwest Brooklyn, Bushwick, Northwest Brooklyn, East New York, New Lots, Borough Park, Flatlands, Flatbush, Southern Brooklyn, Canarsie